APLUS 600VA Uninterruptible Power Supply (UPS) (Plus1L-600AU)

APLUS 600VA Uninterruptible Power Supply (UPS) (Plus1L-600AU)

(No reviews yet) Write a Review
$179.00
Excludes shipping cost which is calculated in the shopping cart
SKU:
Plus1L-600AU

Product Overview

* Controlled by a technologically advanced microprocessor guaranteeing high reliability
* Equipped with 2-steps boost & 1-step buck AVR to stabilize output voltage
* USB port and monitor software is designed to manage UPS status via PC (Optional)
* Built-in DC start function enables UPS to be started without AC power supplied
* Constant current, constant voltage battery charger (CCCV Battery Charger)
* UPS will charge itself even though power switch is off (Off mode charging)
* UPS will shut down upon battery low ; UPS will restart automatically upon AC recovery (Auto-restart)
* Over / under voltage protection (UPS will go to battery mode)
* Provide Lightning, surge, overload, and short circuit protection

L
Plus1L-600AU Plus1L-800AU Plus1L-1000AU Plus1L-1200AU Plus1L-1500AU Plus1L-2000AU
           
Capacity 600VA/360W 800VA/480W 1000VA/600W 1200VA/720W 1500VA/900W 2000VA/1200W
INPUT
Voltage 220/230/240Vac
Voltage Range -30%, +25%
Frequency  50Hz or 60Hz (Auto-Sensing)
OUTPUT
Voltage Regulation +/- 10%
Frequency  AC mode: 47-53Hz for 50Hz or 57-63Hz for 60Hz ; Battery mode:50Hz or 60Hz +/- 1Hz
Waveform Simulated Sinewave
Transfer Time < 6ms(Typical)
Outlet: Australian 3pcs backup/AVR/Surge protected 6pcs backup/AVR/Surge protected
BATTERY
Type Maintenance free sealed lead-acid battery
Voltage 12VDC 24VDC
Capacity & Number 12V/7AH*1pc 12V/9AH*1pc 12V/7AH*2pcs 12V/7AH*2pcs 12V/9AH*2pcs 12V/9AH*2pcs
Recharge Time 5 hours to 90% after complete discharge
Safety Protection Over Charge & Over Discharge Protection
Advanced Battery Management Yes
DISPLAY
LCD Status Indicators Input voltage, Output voltage, Load level, Battery level, Fault, Battery fail, Overload, AC normal
AUDIBLE ALARM
Battery Mode Two short tones every 8 seconds
Low Battery Four short tones every second
Overload Beeping continuously
Fault Beeping continuously
MANAGEMENT
Smart USB Communication Port
Plus1L series: N/A
 
ENVIRONMENT
Operating Temperature 0° C - 40° C (32℉~104℉)
Humidity 0-95% (Non-condensing)
Acousitc Noise <40 dB at 1M
PHYSICAL
Dimension (D*W*H) 305*98*170mm 385*98*170mm 360*150*160mm

*Product specifications are subject to change without further notice.  

Reviews

(No reviews yet) Write a Review